Sales & Service: 1-888-TEI-WOWS
1-888-834-9697

24 Hour Emergency Response: 800-966-9282

Environmental, Health & Safety Blog

Part I: OSHA Top 10 Analysis and Recommendations for 2017

Posted by Mark Liffers on Mon, Jan 08, 2018

OSHA Top 10Every year, the Occupational Safety and Health Administration (OSHA) releases a list of the ten most frequently cited safety and health violations for the fiscal year (OSHA top 10), determined by OSHA inspections of workplaces. In September 2017, the preliminary list was released.

Read More

Tags: higher education, OSHA, safety, higher-ed, OSHA regulations, OSHA violations, OSHA standard, healthcare, industrial, life sicences

OSHA Top Ten Violations of 2017

Posted by Rick Foote on Mon, Oct 30, 2017

Every year, the Occupational Safety and Health Administration (OSHA) releases a list of the ten most frequently cited safety and health violations for the fiscal year, determined by OSHA inspections of workplaces. Last month, the preliminary (as of Sept. 5, 2017) top ten violations for fiscal year 2017 were announced. Here are the results:

Read More

Tags: higher education, OSHA, OSHA violations, OSHA standard, healthcare, industrial, life sciences

OSHA's Laboratory Standard: Customizing Your Chemical Hygiene Plan

Posted by Nicole Bernard-Rance on Mon, Oct 16, 2017

The Occupational Safety and Health Administration (OSHA) sets standards for facilities to abide by to assure safe and healthy conditions in the working environment. While their mission is straightforward, sometimes organizations can overlook particular standards and not realize certain regulations exist or who they might affect.

Read More

Tags: higher education, OSHA, chemical, higher-ed, lab safety, chemical labeling, lab safety. laboratory safety, healthcare, life sciences

OSHA Fit Testing Procedures: General Requirements for Test Exercises

Posted by Eric Borecky on Mon, Oct 09, 2017

As part of a company's respiratory protection program, for an individual to be able to use a respirator, they must be initially fit tested and annually thereafter to assure the respirator provides a tight fitting seal. To make sure your organization is performing fit tests appropriately, we've compiled several OSHA requirements from Appendix A to 1910.134: Fit Testing Procedures (Mandatory). Keep reading to see the general requirements for test exercises as described by OSHA

Read More

Tags: higher education, OSHA, higher-ed, healthcare, industrial, life sciences, fit test, fit testing

Lab Training for Faculty and Students at Colleges and Universities

Posted by Corinne MacDonnell on Mon, Oct 02, 2017

Environmental, health, and safety (EH&S) programs within a higher education niche pose unique challenges due to the complexity and ever-evolving nature of colleges and universities. There are several marks of a successful EH&S program, including a comprehensive training program for faculty and students. Today, we are going to share our tips and best practices for creating an effective lab training program that will help your college or university put together a program to minimize the risk of injury or illness to faculty, students, and researchers. Keep reading to learn the steps to creating a successful lab training program.

Read More

Tags: RCRA, higher education, OSHA, higher-ed, lab safety, lab training

OSHA's Walking-Working Surfaces and Personal Fall Protection Systems Final Rule: Quick Facts

Posted by Corinne MacDonnell on Mon, Sep 18, 2017

According to OSHA, falls from heights and on the same level (a working surface) are among the leading causes of serious work-related injuries and death. To better protect workers from slips, trips, and falls, OSHA has issued a final rule on Walking-Working Surfaces and Personal Fall Protection Systems (29 CFR part 1910, subparts D and I) that updates and clarifies standards and adds training and inspection requirements. By making these changes, OSHA estimates that 29 fatalities and 5,842 lost-workday injuries will be prevented every year. Keep reading to learn some quick facts about the final rule from OSHA.

Read More

Tags: higher education, OSHA, regulations, regulatory, fall safety, industrial

Respirator Fit Tests: Quantitative vs. Qualitative

Posted by Pete Schooling on Mon, Sep 11, 2017

In my last post, I discussed OSHA's Respiratory Protection standard, 29 CFR 1910.134, and what employees need to do before using a respirator. In that post, I promised a follow up detailing the two different types of fit tests, quantitative and qualitative, which is what I am here to review today.

Read More

Tags: higher education, OSHA, respiratory protection plan, respirators, respiratory protection, healthcare, industrial, life sciences, fit test, fit testing

OSHA's Multi-employer Worksite Policy: Overseeing Contractors and Employees

Posted by Michael DeRosa on Mon, Aug 21, 2017

Do you work at a site with multiple employers? Are you responsible for overseeing contractors on a worksite?

If so, you've come to the right place! As you know, OSHA governs the employer to employee relationship. But wait, does that just apply to your own employees? Let discuss that for a minute. Relationships as they relate to multi-employer worksites fall into four categories:

Read More

Tags: OSHA, environmental consulting

OSHA Respiratory Protection: What Employees Need to Do BEFORE Using a Respirator

Posted by Pete Schooling on Mon, Aug 14, 2017

Several OSHA regulations require the use of respirators, including OSHA's Respiratory Protection standard, 29 CFR 1910.134. Respirators are used to protect employees from harmful dusts, smokes, mists, and other materials or hazardous atmospheres. While these protective devices are necessary in certain circumstances, OSHA prohibits their use until certain requirements have been met to prove that employees know how to use them properly. Continue reading to learn some of OSHA's requirements for using respirators.

Read More

Tags: higher education, OSHA, respiratory protection plan, respirators, respiratory protection, healthcare, industrial, life sciences

OSHA's Process Safety Management Standard: Is Your Facility Affected?

Posted by Rick Foote on Tue, May 23, 2017

It's no secret that OSHA has been busy when it comes to monitoring facilities with highly hazardous chemicals (HHCs). Since 2010, OSHA has issued more than 69 enforcement cases regarding Process Safety Management (PSM), and a recent safety and health fine was just issued for $264,000. The problem is, many organizations don't understand OSHA's PSM standard or realize if it even applies to them. Read below to learn all about the Process Safety Management standard and find out whether or not the rule is applicable to your facility.

Read More

Tags: Industrial Consulting Services, manufacturing, OSHA, chemical manufacturers, hazardous chemical, hazardous chemicals, chemical safety, industrial, industrial companies

Subscribe by Email

Most Popular Posts